|
Spectracide Pruning Seal |
Hazard Statements
Extremely flammable aerosol. Contains gases under pressure; may explode if heated. Causes skin irritation. May cause cancer. Suspected of damaging fertility or the unborn child. Harmful to aquatic life with long lasting effects.
Precautionary Statements
Keep away from heat, sparks, open flames, and hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store in a well-ventilated place. Wash hands thoroughly after handling. Wear protective gloves. If on skin: Wash with plenty of water. If skin irritation occurs: Get medical advice. Take off contaminated clothing and wash it before reuse. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective clothing/eye protection/face protection. If exposed or concerned: Get medical advice/attention. Store locked up. If exposed or concerned: Get medical advice/attention. Dispose of contents in accordance with all local, state/provincial and federal regulations. For more information see product label. Dispose of contents in accordance with all local, state/provincial and federal regulations. For more information see product label. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing, eye protection, and face protection.
Manufacturer information
Name
Spectrum Group, Division of United Industries Corporation
Phone
1-800-917-5438
Address
PO Box 142642,
St Louis, MO 63114-0642
PICTOGRAMS
HMIS
| HEALTH |
|
| FLAMMABILITY |
|
| PHYSICAL HAZARD |
|
| PERSONAL PROTECTION |
Eye/face protection: Skin and body protection: Respiratory protection: General hygiene considerations: Liquid spray aerosol No data available Wear safety glasses with side shields (or goggles). Wear chemical-resistant gloves, footwear, and protective clothing appropriate for the risk of exposure. Contact health and safety professional or manufacturer for specific information. In case of inadequate ventilation use suitable respirator. Seek advice from local supervisor. Observe good industrial hygiene practices. Wash hands before breaks and immediately after handling the product. When using do no smoke. Do not handle until all safety precautions have been read and understood. Obtain special instructions before use. Wash contaminated clothing before reuse. Avoid contact with skin. Provide easy access to water supply and eye wash facilities. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level |
Le Sueur-Henderson Public Schools
Local data
SKU #
